Badger Roll & Machine, LLC is proud to share with our valued customers our capacity list.
| Press No. 1 | Two Poster Press
Maximum tons per inch,
Press Ram Diameter
Maximum Roll Face |
400
14 Inches
48 Inches
|
| Press No. 2 | Two Poster Press
Maximum tons per inch
Press Ram Diameter
Maximum Roll Face
Maximum Roll Diameter |
800
16 Inches
120 Inches
28 Inches |
| Press No. 3 | Two Poster Press
Maximum tons per inch
Press Ram Diameter
Maximum Roll Face
Maximum Roll Diameter |
1,550
18.875 Inches
167 Inches
32 Inches |
| Press No. 4 | Two Poster Press
Maximum tons per inch
Press Ram Diameter
Maximum Roll Face
Maximum Roll Diameter |
2000
23.500 Inches
193.00 Inches
39.500 Inches |
| Press No. 5 | Two Poster Press
Maximum tons per inch
Press Ram Diameter
Maximum Roll Face
Maximum Roll Diameter |
2550
24.250 Inches
256.00 Inches
42.00 Inches |
| Press No. 6 | Two Poster Press
Maximum tons per inch
Press Ram Diameter
Maximum Roll Face
Maximum Roll Diameter |
2,450
24.250 Inches
228 Inches
42 Inches |
| Press No. 7 | Four Poster Press
Maximum tons per inch
Press Ram Diameter
Maximum Roll Face
Maximum Roll Diameter |
5500
51.125 Inches
394.00 Inches
52.00 Inches |
| Press No. 8 | Two Poster Press
Maximum tons per inch
Press Ram Diameter
Maximum Roll Face
Maximum Roll Diameter |
400
12 Inches
36 inches
13 inches |
| Swift Engine Lathe | 100 HP. 64.1/2” Swing over bed. 52” Swing over carriage.
384” between centers. 15-ton capacity between centers.
25-ton capacity with steady rest. Equipped with Readouts.
Chuck diameter 58.00” - Equipped with Belt Grinding Attachment and a Tool Post Hard Wheel Grinder |
| VDF Engine Lathe | 48.1/2” Swing over bed. 48” Swing over carriage. 480” between centers. Spindle Bore 6.7/8” – 39.1/2” Chuck. Steady rest up to 24.3/4” – Serial # 4067H |
| Summit Engine Lathe | 41” Swing over bed. 26.500” Swing over carriage.
360” between centers. Equipped with Taper Turning Attachment, 39” 4-Jaw Chuck,
(2) – 4-Way Tool Posts, (2) – Steady Rests,
Rapid Travers, Readouts, Inch/Metric Threading. |
| Monarch Engine Lathe | 22.1/2” Swing over bed. 13.” Swing over cross slide 53.” Between centers max, Taper attachment, Readouts |
| ECOCA EL-6130E | 20 HP. 24” Swing over bed. 15.750” Swing over carriage. 118” between centers. Chucks – 15” 3-Jaw, 20” 6-Jaw, 1-
Follow Rest, 2-Steady Rest, Spindle Bore Dia. 3.220”
117” Longitudinal Work Stroke (Z-Axis)
11.420” Transverse Work Stroke (X-Axis)
Mitsubishi 5201 Control with Teach-In Software, |
| Binns & Berry-80136 | Data 90 CNC – 33.4” Swing over bed. 27.5” Swing over cross slide. 156.1” between centers, Fagor 8025TG Control, (1) Buck Chuck # 6424R – 24” (4-Jaw) Independent Chuck. (1) Three Point Steady Rest 1” – 12” Roller Jaws, (2) Three Point Steady Rest 10” – 20” Roller Jaws. |
| Bullard 36" Cut-Master 75 | 30 HP, Table Capacity 36.0” Under Rail 30.0”. Equipped With 4 – Axis Digital Rea |
| Sacem MST-90" Boring Machine | 15 HP, 360 Degree Turn Table, Main Spindle Diameter 3.1/2”, Main Spindle Traverse 31.1/2”, Spindle Vertical Travel 39.1/2”, Min / Max Height From Main Spindle Center to The Table 0-47.1/4”, Table Size 47.1/4” x 57.1/8”, Automatic Cross Travel 67.”, Automatic Long Travel 53.1/8”, Max Wt. Centered On Table 8,800 Lbs. Sony 3 Axes Digital Readout. |
| Lucas 441B72 Boring Machine | 20 HP, 4” Main Spindle Diameter, # 50 Taper, 1,500 RPM
3 – Axis Digital Readout, Tail Stock for Line Boring
Z – Spindle Travel 24.”
X – Horizontal Travel of Table 60.”
Y – Vertical Travel of Head 60.”
W – Axis Travel 72.” |
| Kearnery & Trecker 4HC Mill | 25 HP. With a # 40 Quick Switch, Table = 74.” X 15.1/2”
With Readouts, X = 42.” Y = 13.500” Z = 12.00” |
| Fadal VMC 6030 | Fadal MP 32 Control, Virtual Gibbs Cam with Color Monitor, 22.5 HP, 10,000 RPM High Torque Spindle, 60”X / 30”Y / 30”Z, Tool Changer CAT – 21 Positions, 4th Axes Rotary Table V-300 with Tail Stock Assembly, Hole Through Coolant Spindle, Rigid Tapping |
| Fosdick Radial Drill | 4 Ft. Sensitive.
Table Size, 24” x 48” |
| Wrapper Special | 46.1/2” Swing over carriage x 450” between centers |
| American Hofmann Horizontal, Hard Bearing, Dynamic Balancer | Type HX-27.1, with PCX-27.1 High Tec touch screen microprocessor instrumentation, windows 2000 operating system. 50 HP drive, Max weight of rotor mounted in its own bearings 70,000 Lbs. Max weight of rotor mounted directly on the pedestal bearings 50,000 Lbs, Max diameter of rotor over belt tensioner 69.00” Max diameter over rest of bed 94.00”. Minimum length of rotor between centers of bearings 30.00” / Max length between pedestals 445.00”. Balancing Speeds infinitely variable – Dependent on Drive diameter of rotor.Type HX-27.1, with PCX-27.1 High Tec touch screen Horizontal, microprocessor instrumentation, windows 2000 Hard Bearing, operating system. 50 HP drive, Max weight of rotor Dynamic Balancer, mounted in its own bearings 70,000 Lbs. Max weight Max weight of rotor mounted directly on the pedestal bearings 50,000 Lbs, Max diameter of rotor over belt tensioner 69.00” Max diameter over rest of bed 94.00”. Minimum length of rotor between centers of bearings 30.00” / Max length between pedestals 445.00” Balancing Speeds infinitely variable – Dependent on Drive diameter of rotor. |
| Farrel (2) Wheel #60A3057 | Wheel Head 25 HP – Spindle Speed Range, B1 Directional, Programmable 100 – 1200 RPM, Grinding Wheel Size 3” Face x 20” Diameter, Headstock 50 HP – Work Speeds 4 – 24 RPM Programmable. Carriage 10 HP Speeds 2 – 60 IPM. Carriage Ways Center to Center 66” Overall Length Carriage Ways 88”, Maximum Diameters Ground 42” On Center and 60” Below Center, Minimum Diameter Ground On Center 8” Maximum Roll Body Face Length 315” - Equipped With The Machine, a new Belt Grinding Attachment, a new Roll Track Measuring System, the system is capable of measuring & recording Roll Profile, Crown, Compound Crown, Dubbing, T.I.R. Readings, Concentricity, Two Plane Concentricity, Roundness & Tracking Measurements |
| Arter Surface Grinder | Table Size - 32” Diameter Magnetic, |
| Gem Superfinisher | Serial # 93099 |
| Wilton 8413 Horizontal Saw | 13” X 18” Semi Automatic Dual Column Cut-Off, 5-Horsepower, Variable, 60-410 FPM |
| Kalamazoo 13AW Horizontal Saw | 13.” X 19.” Rectangular & 13.” Round Capacity, 2-Horsepower |
| Startrite 20RF Vertical Saw | 20.” Throat, 10.” Under Guide, Table Size 21” x 21”
Table Tilt 45 Degrees & 15 Degrees Left. |
| Morrison Heavy - Duty Keyseater | 2 – HP. Cuts 1/16” to 1.1/4” Key-Ways, 9” Maximum Length of Cut, Length of Stroke, 3” – 4.1/2” 6” – 7.1/2” & 9” Feeds – (3) .002” - .004” & .006”
Distance From 1” Cutter to Column – 16.1/4”
Max-Distance Under Standard Clamps – 14”
Distance Between Clamps 25.1/2”
Table Size 24” X 27” |
| Electro Arc Metal Disintegrator | Model 300S, Accurate From .020” to 3.” 60,000 Lb. Tensile Strength, 1,500 Lb. Holding Power, 4 – Axis Positioning, |
| Slitter Machine | Serial #L-0-3392 |
| Tool Room | 2-Horizontal Tool Grinders, Miscellaneous Tool Grinders & Fixtures |
| Granite Table | 10.’ X 5.’ True Stone Inspection Table |
| Granite Table | 8,’ X 4.’ Starrett Pink Inspection Table |
| Miscellaneous Inspection Equipment | Brown & Sharp Cadillac Height Gage 18’ Starrett & Brown & Sharp Height Gages, Dial Bore Gages to 16” Inside Micrometers to 57” O.D. Micrometers to 60” Rockwell Hardness Tester, Plus Additional High Tolerance Measuring Tools |
| Wisconsin OvenWisconsin Oven SWH-8307G | Chamber Dimensions – 8’ Wide x 30’ Long x 7’ High, Temperature Ratting – Maximum 500 Degrees F, Minimum 125 Degrees F |
| Overhead Cranes | 10 Ton
Maximum Lift Height
(2) 15 Ton
Maximum Lift Height
29.’ 6” & 17.’ 10”
(2) 25 Ton
Maximum Lift Height
25’.10”
40 Ton
Maximum Lift Height
29.’ 6” |